GripID and Integrated Biometrics unveil GripID MANNIX, the Next Generation of Mobile Full-palm Identification
Jun 11th, 2025
Bezel-less and Powered by Your Mobile Phone
Leveraging the strengths of existing LES technology, Mannix is the only compact, mobile palm scanner on the market that can be powered by your mobile phone. Plus, the Zero-Bezel Technology (ZTX) used by Mannix removes the traditional bezel allowing maximum flexibility and ease of use.
Slightly larger than the average adult hand, the entire Mannix assembly measures in at only 161 mm x 161 mm x 20 mm. The device has an active scanning area of 127 mm x 127 mm/5” x 5” and is FBI Appendix F-certified.
The IB SDK enables capture of Upper Palm, Lower Palm, Writer’s Palm (hypothenar), and Rolled Prints.
FASTER
- Rapid dry finger capture
- No need to clean latent prints in high-volume situations
- Easy integration via single SDK for all Integrated Biometrics FBI-certified products
BETTER
- Unaffected by extreme temperatures, direct sunlight, or bright artificial lights
- Compact, lightweight, and rugged
- Rejects common spoofing attacks
- Emits no bright lights during scans
- Meets or exceeds US military durability specifications
SMARTER
- Competitive pricing
- Extremely low power consumption
- Eliminates consumables (silicone membranes or cleaning tape)
- Lower maintenance costs
Light Emitting Sensor Technology (LES)
Integrated Biometrics’ scanners use our patented light-emitting sensor (LES) technology to deliver fixed and mobile FBI certified fingerprint imaging in an exceptionally durable, lightweight scanner.
LES-based biometric solutions provide picture-perfect image quality in both direct and indirect sunlight and are resistant to finger contaminants such as grease, oil, water, dust and chemicals.
Mannix Specifications
OS Support & System Requirements
OS Support
Windows Desktop Editions 10, 11
Linux Kernel 4.0 or newer (64bit, ARMv8)
- Ubuntu 18.04LTS or newer
- Debian 10, 11, or newer
Android 10, 11, 12 or newer
CPU
2.0 GHz or higher ARM | 2.0 GHz or higher
Memory
1GB or higher
Images & Capture
Sensor Type
LES ZTX
Camera
TFT
Resolution
500 ppi
Grayscale
256 grayscale dynamic range
Image Size
2500 x 2500 pixels
Supported Image Formats
RAW, JPEG2000, BMP, PNG, WSQ (FBI-approved)
FBI / Image Certifications
Appendix F-Certified and Appendix P-Compliant, FAP 60
Speed/API Interface
-
- Min frame rate for flat capture > 6 fps
- Min frame rate for roll capture > 10 fps
Quality Scoring
NFIQ v1 supported on all OSes and NFIQ2 for Windows
Weight & Dimensions
Product Weight
600 grams / 1.3 lbs (not including cable)
Platen Size
127.8 mm x 127.8 mm / 5.0” x 5.0”
Sensing Area
127.0 mm x 127.0 mm / 5.0” x 5.0”
Scanner Assembly Dimensions
161.0 mm x 160.9 mm x 20.3 mm / 6.3” x 6.3 x 0.8”
Power & Connectors
Interface
USB 3.0
Connector Type
USB-C Port
Power Source
USB Host
USB Voltage Level
4.4v to 5.25v; full scanning < 500mA, typical > 475mA
Conformance & Certifications
USB Certification
USB-IF compatibility
FCC/CE/UKCA Conformance
FCC Part 15 (per ANSI C63.4:2014) Class B, CE Emissions: EN 55032:2015 /A1:2020 Class B, EN, 55035:2017 /A11:2020
Air Discharge / Contact Discharge
In compliance with IEC 61000-4-2
Equipment Safety
IEC 62368-1
Hazardous Material
RoHS Directive 2011/65/EU with amendment 2017/2102
Vibration Test
IEC 60068-2-64
Compliance/Certifications
- Fingerprint Template Output Formats
- ISO_19794_2_2005/2011, ISO_19794_4_2005/2011
- ANSI_INCITS_378_2004/ANSI_INCITS_381_2004
- 500 PPI fingerprint capture supporting rolls and flats
- ISO 9001:2015
- MOSIP Compliant
Temperature & Humidity
Operating Temperature
-10°C ~ +55°C / 14°F ~ 131°F
Humidity
30~85% RH < 40°C / 104°F (Non-condensing)
Storage Temperature
-40°C ~ +80°C / -40°F ~ 176°F
Surface & Systems
Ingress Protection / Water / Dust
IP65 Sealed bezel to scanning surface
Surface Durability
MIL-C-675c 4.5010, MIL-STD-810F
Surface Protection
NBD Nano high-durability, anti-microbial coating
Cleaning & Sanitization
For proper cleaning and disinfection of IB products, visit
/cleaning
Compliance & Regulations
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by Integrated Biometrics could void the user’s authority to operate this equipment legally under FCC regulations.
Available Versions
| Product | Part Number | Available Cables |
|---|---|---|
| Mannix Palm Scanner | MN11000-000 | USB Type C 3.0 |
Available Accessories
| Product | Part Number | Description |
|---|---|---|
Mannix Rugged Bumper Case |
MNBUPCA-001 | Black |
Warranty Information
All products have a 12-month warranty starting from the date of delivery. Additional years warranties available. Inquire with your salesperson.
Resources
SUPPORT/SOFTWARE DEVELOPMENT
The IBScanUltimate Software Development Kit (SDK) is a set of robust tools that empower solution providers with the ability to deploy compelling LES biometric acquisition applications. The SDK includes support for a variety of operating systems and exceeds the needs of the most challenging environments.
The SDK includes Application Programming Interface (API) documentation, IB software components, demonstration applications and source code for each platform. Demonstration source code is a simple reference for integrators to rapidly develop solutions using Integrated Biometrics’ LES technologies. We encourage you to review the included materials and explore the limits of creativity when designing custom biometric solutions.
If you have any questions, please contact your Integrated Biometrics reseller or the IB team. We’ll be glad to provide assistance during solution development.
